廠區辦公室裝修 廠房車間裝修 廠房翻新 廠房地坪 廠房外墻涂料粉刷 廠房屋面防水
廠房裝修布局一般來說面積較大、功能規劃要合理;給后續發展留有空間;廠房裝修綜合功能比較復雜斑駁;涉及到方方面面、耐磨、防火,抗壓、耐污、無塵車間、防靜電車間、同時還會具備辦公樓等一系列的功能;
廠房裝修要求在最經濟的前提下;使廠房空間干凈整潔、布局合理、環境宜人適合員工辦公室;
1、伴隨著廠房最多的就是火災問題,為了火災的發生,除了要注意使用防火材料之外,在施工中,也要注意火災的發生。
《建筑內部裝修設計防火規范》嚴格規定,建筑內部裝修設計,在民用建筑中包括頂棚、墻面、地面、隔斷的裝修,以及固定家具、窗簾、幄幕、床罩、家具包布、固定飾物等;在工業廠房中包括頂棚、墻面、地面、隔斷的裝修。裝修中使用大量可燃、易燃材料,且動用電氣焊等明火多,造成大量火災的導火線,應高度重視、應采用非燃燒體或難燃燒體。。廠房的建筑圍護結構和室內裝修,應選用氣密性良好,且在溫度和濕度等變化作用下變形小的材料
2、廠房裝修的時候,要對不同區域進行區域劃分;不同區域的地面應采用不同的裝飾材料,、上人地面和叉車道、應分開設置;因叉車每天要有很多磨損,盡量選擇些經久耐用的材料,地面承重也有較高的要求、宜在原來地面基礎上鋪設一層混凝土,有些需要防靜電的廠房則地面宜鋪設防靜電地板或防靜電pvc等材料;
3、潔凈室的墻.頂.地的表面,應符合平整、光滑、不起灰、耐磨、易除塵清洗、不易積聚靜電、避免眩光、便于除塵等要求;應減少凹凸面,陰陽角做成圓角。室內裝修宜采用于操作;宜采用潔凈材料作為裝飾飾面。
Factory office decoration workshop workshop decoration workshop renovation workshop floor of the workshop exterior wall paint painting workshop roof waterproof
Generally speaking, the layout of plant decoration is larger and functional planning should be reasonable. Leave room for further development; The comprehensive function of plant decoration is complex and mottled. Involved in all aspects, wear-resisting, fire prevention, pressure resistance, pollution resistance, dust-free workshop, anti-static workshop, but also have a series of office building functions;
Plant decoration requirements in the most economic premise; Make the factory space clean and tidy, layout reasonable, environment pleasant and suitable for employees' office;
1. Fire is the most common problem in the workshop. In order to have a fire, we should not only pay attention to the use of fireproof materials, but also pay attention to the occurrence of fire in the construction.
"Code for fire prevention design of building interior decoration" strictly stipulates that the design of building interior decoration includes decoration of ceiling, wall, ground and partition, as well as fixed furniture, curtain, curtain curtain, bedspread, furniture covering cloth and fixed decorations in civil buildings. In the industrial plant including ceiling, wall, ground, partition decoration. A large number of combustible, inflammable materials are used in the decoration, and the use of electric welding and other open fire, causing a large number of fire fuse, should be highly regarded, should use non-combustion or difficult combustion body. The building envelope structure of workshop and indoor decorate, should choose airtight good, and the material that deforms little below the action of the change such as temperature and humidity
2. When the workshop is decorated, it is necessary to divide different areas; The ground of different area should use different adornment material, the ground of person and forklift, should set separately; Because the forklift should have a lot of wear and tear every day, try to choose some durable materials, the ground load bearing also has higher requirements, appropriate in the original ground foundation laid a layer of concrete, some need anti-static workshop ground should be laid anti-static floor or anti-static PVC materials;
3. The surface of the wall, roof and floor of the clean room should meet the requirements of flatness, smoothness, no ash, abrasion resistance, easy dust removal and cleaning, not easy to accumulate static electricity, avoid glare and easy dust removal. Should reduce concave and convex surface, Angle of Yin and Yang make round corner. Indoor decoration should be used in operation; Clean materials should be used as decorative finishes.
技術支持:白鹿建設